SPECTRUM INSTRU...

ūüď欆¬†Mahalakshmipuram, Bangalore
‚ėŹ¬† +91-80-23490523/23492253
‚úȬ† salesblr@adilabtech.com

UV- VISIBLE SPECTROPHOTOMETER

BASIC- SINGLE BEAM- 2NM

Basic Instrument Functions

Mode  of operation Photometric measurement,(A/T) Concentration measurement(C)
Concentration measurement Slope  method (C=K*A)

Standard curve  method (C=K*A+b)

Photometric analysis T, A, and C measurement
Quantitative analysis Standard curve  measurement
Display mode Wavelength, %T, Absorbance, Concentration

and Standard curve.

Storage function 56 standard curves in the instrument
Light  source switching Automatic switching at 325nm (can  select upto  370nm )
Light  source management Light  source on/off  status can  be controlled to elongate

its working life.

System self-testing Wavelength self-testing, light  sources self-testing,

energy calibrating.

Instrument control Standalone or PC Software
Signal output USB  & Printer Port

 

 

PC Mode  (additional function using  Win-spec Software)

Kinetic analysis                              Measurement with time-scanning.

Multiple wavelength analysis       Measurement with many wavelengthes

DNA/Protein analysis                    Automatic calculation of the nucleic acid purity

Software functions                        Validation (GLP/GMP) and a lot of other functions

 

Performance Specification

Optic  system Single beam with 1200 lines/mm diffraction grating monochromator.
Light  path 10mm-100mm
Spectral bandwidth 2nm
Wavelength range 190-1100nm (0.1nm increment) Wavelength accuracy
Wavelength repeatability ¬Ī0.3nm
Stray¬† light ‚ȧ0.05%T (at 220nm NaI & 340nm, NaNO2)
Photometric mode T, A, and Conc. measurement;
Photometric range 0-125.0%T,  -1.000-4.000A *,0.000-9,999 Conc.
Photometric accuracy ¬Ī0.3%T
Photometric repeatability ¬Ī0.2%T
Baseline stability ¬Ī0.002A/hr (at 500nm, after lamp turned on for 1 hour)
Baseline flatness ¬Ī0.002A
Noise level ‚ȧ0.001A (at 0A, 500nm)
Light source Tungsten-Halogen & Deuterium
Detector Silicon Photodiode
Optic  system Single beam with 1200 lines/mm diffraction grating monochromator.

Accessories available

  • 10mm light path, 6 cell auto cuvette holder.*
  • Micro-volume cuvette (30őľl, as the minimum volume.) (Adjustable cuvette holder should be used.)
  • Ultra-micro cuvette (0.1őľl, as the minimum volume.)
  • Peltier single cell holder system (Used for example: kinetic analysis.)
  • Sipper system
  • Sipper with adjustable temperature cuvette holder.
  • Multipurpose cuvette holder for both 10mm light path cuvette and √ė8-√ė22 round tube
  • 16 mm round tube holder for COD test
  • Thin film test holder
  • Reflectance holder for glass filter sample
Main  Specification

Display                               128×64 characters LCD  with  4 lines  display

Sample Compartment        100mm Optical Path

Standard Cell Holder         10mm

Power Requirement¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬† 110/220VAC, 50/60Hz, ¬Ī10%

Size                                       435(W)×350(D)×205 (H) mm

Net Weight                            12Kg

Gross weight                         15Kg

UV-VIS- SINGLE/DOUBLE BEAM- 2NM

Basic Instrument Functions

Mode  of operation Photometric measurement,(A/T) Concentration measurement(C)
Concentration measurement Slope  method (C=K*A)

Standard curve  method (C=K*A+b)

Photometric analysis T, A, and C measurement
Quantitative analysis Standard curve  measurement
Kinetic analysis Measurement with time-scanning
Spectrum scan  analysis Spectrum scan  function
Multiple wavelength analysis Measurement with many  wavelengths
DNA / Protein analysis Automatic calculation of the purity

and concentration of nucleic acid

Storage function 128 standard curves in the instrument
 

energy calibrating.

Light  source switching Automatic switching at 325nm (can  select upto  370nm )
Light  source management Light  source on/off  status can  be controlled to elongate

its working life.

Instrument control Standalone or PC Software
Signal output USB  & Printer Port
PC Mode  (additional function using  Win-spec Software)

Software functions                        Validation (GLP/GMP) and a lot of other functions

 

Performance Specification

ITEM SP-UV 200S SP-UV 300SRB
Optical system 1200 lines/mm diffraction grating monochromator
Optic  type Single beam Split  (Dual)  beam
Light  path 10mm-100mm
Spectral bandwidth 2nm 2nm
Wavelength range 190-1100nm ( 0.1nm increment )
Wavelength accuracy ¬Ī0.5nm ¬Ī0.3nm
Wavelength repeatability ¬Ī0.3nm ¬Ī0.1nm
Stray¬† light ‚ȧ0.05%T (at 220nm NaI & 340nm, NaNO2) ‚ȧ0.03%T (at 220nm NaI & 340nm, NaNO2)
Photometric mode T, A, and Conc. measurement
Photometric range 0-300.0%T, -3.000 to 4.000A , 0.000-9,999 Conc.
 

Photometric accuracy

 

¬Ī0.3%T

¬Ī0.002A (0-0.5A)

¬Ī0.004A (0.5-1.0A)

¬Ī0.008A (1.0-2.0A)

Photometric repeatability  

¬Ī0.2%T

¬Ī0.001A (0-0.5A)

¬Ī0.002A (0.5-1.0A)

¬Ī0.003A (1.0-2.0A)

Baseline stability ¬Ī0.002A/hr (at 500nm, after lamp turned on for 1 hour) ¬Ī0.001A/hr (at 500nm, after lamp turned on for 1 hour)
Baseline flatness ¬Ī0.002A (200-1100nm)
Noise level ¬Ī0.001A/hr or ‚ȧ0.0001 RMS¬† (at 0A, 500nm)
Light source Tungsten-Halogen & Deuterium
Detector Silicon Photodiode 2 Silicon Photodiodes

Accessories available

  • 10mm light path, 6 cell auto cuvette holder.*
  • Micro-volume cuvette (30őľl, as the minimum volume.) (Adjustable cuvette holder should be used.)
  • Ultra-micro cuvette (0.1őľl, as the minimum volume.)
  • Peltier single cell holder system (Used for example: kinetic analysis.)
  • Sipper system
  • Sipper with adjustable temperature cuvette holder.
  • Multipurpose cuvette holder for both 10mm light path cuvette and √ė8-√ė22 round tube
  • 16 mm round tube holder for COD test
  • Thin film test holder
  • Reflectance holder for glass filter sample

Scope of supply

  • 10mm manual four-cell holder 1pcs
  • 10√ó10√ó45 mm standard glass cuvettes 4pcs
  • 10√ó10√ó45 mm standard quartz cuvettes 2pcs
  • USB connection cord 1pcs
  • Power cable 1pcs
  • User manual 1pcs

Main Specifications

Display                               8 inches Color  Touchscreen

Sample Compartment        100mm Optical Path

Standard Cell Holder         10mm

Power Requirement¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬† 110/220VAC, 50/60Hz, ¬Ī10%

Size                                       435(W)×350(D)×205 (H) mm

Net Weight                            12Kg

Gross weight                         15Kg

MAIN SPECIFICATION

DOUBLE BEAM- VARIABLE BANDWIDTH

BASIC INSTRUMENT FUNCTIONS
Mode  of operation Photometric measurement,(A/T) Concentration measurement(C)
Concentration measurement Slope  method (C=K*A)

Standard curve  method (C=K*A+b)

Photometric analysis T, A, and C measurement
Quantitative analysis Standard curve  measurement
Kinetic analysis Measurement with time-scanning
Spectrum scan  analysis Spectrum scan  function
Multiple wavelength analysis Measurement with many  wavelengths
DNA / Protein analysis Automatic calculation of the purity

and concentration of nucleic acid

Storage function 128 standard curves in the instrument
System self-testing Wavelength self-testing, light  sources self-testing,

energy calibrating.

Light  source switching Automatic switching at 325nm (can  select upto  370nm )
Light  source management Light  source on/off  status can  be controlled to elongate

its working life.

Instrument control Standalone or PC Software
Signal output USB  & Printer Port
PC Mode  (additional function using  Win-spec Software)

Software functions                        Validation (GLP/GMP) and a lot of other functions

 

Performance Specification

ITEM SP-UV 500DB SP-UV 500VDB
Monochromator

Optical System

1200 grooves/mm diffraction grating monochromator.

Double beam

Light  path  through sample

Spectral bandwidth

10mm (standard), up to 100mm (option)
1nm 0.5,1,2,4nm
Wavelength range

Wavelength accuracy

190-1100nm ( 0.1nm increment )

¬Ī0.3nm

Wavelength repeatability

 

Stray  light

¬Ī0.1nm

 

‚ȧ0.02%T (at 220nm NaI & 340nm, NaNO2)

‚ȧ1.0%T (at 198 nm KCL)

Photometric modes

Photometric range

T, A, and Conc. measurement

0-300.0%T, -3.000 to 4.000A , 0.000-9,999 Conc.

Photometric accuracy

 

 

Photometric repeatability

¬Ī0.002A (0-0.5A)

¬Ī0.004A (0.5-1.0A)

¬Ī0.006A (1.0-2.0A)

 

¬Ī0.001A (0-1.0A)

¬Ī0.003A (1.0-2.0A)

Baseline stability

 

Baseline flatness

¬Ī0.0003A/hr (at 500nm, after lamp turned on for 1 hour)

 

¬Ī0.0006A (200¬† to 1100nm)

Noise level

Light sources

‚ȧ0.00008A (at 0A, 500nm)

Tungsten-Halogen & Deuterium

Detectors 2 Silicon Photodiodes

Accessories availables

  • 10mm light path, 6 cell auto cuvette holder.*
  • Micro-volume cuvette (30őľl, as the minimum volume.) (Adjustable cuvette holder should be used.)
  • Ultra-micro cuvette (0.1őľl, as the minimum volume.)
  • Peltier single cell holder system (Used for example: kinetic analysis.)
  • Sipper system
  • Sipper with adjustable temperature cuvette holder.
  • Multipurpose cuvette holder for both 10mm light path cuvette and √ė8-√ė22 round tube
  • 16 mm round tube holder for COD test
  • Thin film test holder
  • Reflectance holder for glass filter sample
MAIN SPECIFICATION
Display                               8 inches Color  Touchscreen

Standard Cell Holder          10mm

Power Requirement¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬† 110/220VAC, 50/60Hz, ¬Ī10%

Size                                       604(W)×465(D)×255(H) mm

Net Weight                            30Kg

Close Menu